Home > Sawing > Horizontal Bandsaws Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Amada
  • Model:
  • Amada CTB400 automatic bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Bandsaw Machine CTB400CNC The Amada CTB400CNC automatic bandsaw is designed for cutting difficult to saw materials fully automatically and with the minimum operator setup time. The cutting of material is done by a vertical saw frame which doesn’t reply on control of a gravity fed head, reducing the need to compensate for its weight giving greater control when cutting difficult to cut materials. This feature also allows faster cutting times with longer blade life. Coupled with Amada band saw blades, this machine is in a class of it’s own. Windows based CNC Control The functions and set up of the bandsaw are controlled by a Windows based touch screen. Simple to use it enables the operator to choose the size, type, tolerance and number of cuts required of most materials, then JUST PRESS GO. The machine will cut the material and give optimum performance. The screen gives an estimated finish time for each job. A history of cutting and fault finding information is also accessible. Motor and Transmission A high powered 7.5 kw motor coupled with a special high efficiency transmission maintains high cutting rates even when cutting the toughest of materials. Maximum Bandsaw Blade Width A 41mm wide blade 4715mm long 1.3mm thick enabling faster feeds and speeds achieving phenomenal cutting rates even on tough materials such as Inconel, Hastelloy and Monel. Automatic Adjust Wire Brushes Automatically adjusted double wire brush design assures keeping the chip area of the blade clean for maximum life of blade and brushes in all types of cutting. Automatic powered chip conveyor This is situated in the base of the machine and covers the whole area ensuring very efficient swarf removal. Maximum Cutting Capacity Round bar: 430mm Rectangular bar: 430mm x 430mm For a full specification, demonstration or quotation call now on 01274 870311
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Switzerland
      Manufacturer:
      Optimum
      Model:
      BAND SAWING MACHINE OPTIMUM TYPE S-275 N
      Description:
      BAND SAWING MACHINE "OPTIMUM" TYPE S-275 N New - Reference: 1700186 ...

      More Info

    • Manufacturer:
      Addison
      Model:
      Special Offer | Addison Jubilee 250-T Mitre Bandsaw
      Description:
      Precision two-way miter cut to 45 and 60 degrees, right and left | Large mitre scale for precision angle cuts | Swivel head for easy angle cutting without moving material | Electric coolant system with built-in tank and pump | Highly efficient, low e...

      More Info

    • Manufacturer:
      Model:
      Behringer HBP 410-723G
      Description:
      Total power requirement12 kWweight of the machine ca.4,1 tdimensions of the machine ca.3,1 x 5,9 msaw band length6300 mmcapacity 90 degrees: round410 mmcapacity 90 degrees: flat620 x 400 mmcapacity 45 degrees: flat450 x 400 mmcutting range 30° flat3...

      More Info

    • Manufacturer:
      Model:
      SN 420 NEWTON
      Description:
      NEWTON DEVICE DESCRIPTION ACCESSORIES UPON REQUEST: DIMENSIONS > 870 x 1860 x 2100 mm WORKTOP HEIGHT > 955 mm WEIGHT > 550 kg > Round tubes 45° sx: 170 mm 0: 280 mm 45° dx: 230 mm 60°: 150 mm > Square profiles 45° sx: 150 mm 0: 270 mm 45° dx:...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User